Aluminum Expanded Mesh for Equipment Room Acoustic Walls
A close look at aluminum expanded mesh used in the acoustic wall lining of an industrial equipment room in Beijing.
View project specifications
THE PROJECT
Acoustic wall lining for an industrial equipment room
The project is located in Pingfang Township, Chaoyang District, Beijing, on the south side of the Second Airport Expressway. The application is the equipment room acoustic wall lining for an industrial development.
The September 2026 project uses aluminum expanded metal mesh with a base thickness of 0.8 mm and a strand width of 0.8 mm. The specified mesh dimensions are 5 × 10 mm (LWD × SWD).
The photographs document the material rolls, insulation layer, wall lining and installation work. Together, they show the material and its application at the site.
Explore aluminum expanded metalProject specifications
| Material | Aluminum expanded metal mesh |
|---|---|
| Base thickness | 0.8 mm |
| Strand width | 0.8 mm |
| Mesh dimensions (LWD × SWD) | 5 × 10 mm |
| Application | Equipment room acoustic wall lining |
| Project date | September 2026 |
| Project area | 6,000 m² |
MATERIAL & SITE PHOTOGRAPHS
From mesh rolls to wall lining
Workshop and site photographs from the Beijing equipment room project.
Material preparation
Aluminum expanded mesh rolls prepared for the equipment room wall project.
Wall build-up
Installation photograph showing the insulation layer and adjacent faced wall sections.
On-site installation
Work in progress at the Beijing project, with access platforms positioned along the wall.
Wall lining overview
A broader view of the equipment room wall lining and its framing arrangement.
PLAN YOUR SPECIFICATION
Need aluminum mesh for a similar project?
Send your drawing, mesh dimensions, material requirements and quantity so we can review the specification with you.